Srelay recompile for tomato
Hi is there any one could help me to recompile srelay for tomato with TCP_NODELAY on the setsockopt option in socks.c please? http://socks-relay.sourceforge.net/ thank you
View ArticleClik here to view.
Using an external DNS with Tomato isn't working correctly
I have tomato setup to use pihole but I am experiencing very odd DHCP behavior from tomato. I have it setup like this: 1) Basic>Network>Static DNS = 192.168.1.250 2) Advanced>DHCP/DNS ......
View Articlepoor 5Ghz speed on shibby tomato on RT-N66R
I have been using shibby for a couple of years with no real issue other than really poor performance on the 5Ghz radio (around 20Mb/s throughput). the 2.4Ghz performs well (around 100Mb/s) using the...
View ArticleRun Internet Speed Test (From Command Line) bypassing QoS?
I'm working to setup some command line tests for internet / wan performance. I would like to run them remotely to determine when the DSL connection is having or beginning to have problems (as it...
View ArticleBroadcast static IPs hostnames to all devices in the network?
All my devices with static IPs have specific hostnames defined. On my main PC I've also defined this hostnames in the system hosts file pointing to their correct IP addresses. But is there away to...
View ArticleR7000 Wifi unstable
The only thing i mainly do with wifi is doing "DVBViewer" streaming to my sleeping Room. HD 1080i Channel has ~11Mbps. And R7000 + Tomato isnt able to do this without problems. E3000 with Tomato 140...
View ArticleTomato web proxy
Apologize if this has been covered somewhere but I searched and searched but could not find it. I have tomato installed on my asus router. I often travel outside the country and need to set up...
View ArticleTomatoUSB needs to advertise a DNS server to clients but use the ISP provided...
I have a pihole box on my LAN and have LEDE (based on OpenWRT) configured to use it to simply advertise the pihole IP to DHCP clients but still use my ISP DNS servers in the router. I just have pihole...
View ArticleCant access admin panel after flash EA6500 V2
Hi, after flashing tomato firmware version 3.4-140 AIO to my linksys 6500v2 I cannot connect to the admin panel. I have tried 192.168.1/2/3, 10.0.0.1/2, and 192.168.11.1/2. I did once get a response by...
View ArticleRedefining DNS from router to a box running pi-hole
Is the proper place in tomato to redefine the primary DNS entry from the router to a specific box on the network under Basic>Network>Static DNS? Rationale is to have a box running pi-hole be the...
View ArticleFlashing RT-AC3200 from Tomato back to stock firmware
Hey everyone, I've seriously mucked up my wireless settings and I'm trying to go back to stock. My 5GHz #2 network doesn't work at all, my 5GHz #1 network is slow, and my 2.4GHz network is unusable. I...
View ArticleOpenvpn Client on E2500
I've setup an Openvpn client using tomato firmware on a e2500. It connects perfectly to my server at home, unfortunately I can't access my LAN. When I use my laptop and connect to my server at home...
View Article"Wireless Client Filter" reversed its setting behavior
Tomato Firmware 1.28.0000 MIPSR2-132 K26 USB VPN I was adding a new MAC address to the filter list. The setting then is "Disable filter". After saving it and set it back to "permit only the following...
View ArticleR7000 File Share not working
Hello I tried to set up File sharing on my tomato router (Netgear r7000) but I never manage to setup this. FTP Server and Media server working flawlessly I've found following messages in syslog related...
View ArticleSecond 5Ghz band on Asus RT3200 not working
I installed the tomato firmware on a asus rt3200 and it seems the second 5ghz band doesn't work. At first it works, then probably within 15mins I stop seeing the network SSID. I tried a factory reset...
View ArticleHow to use my own SSL certificates without having them reset?
I followed the instructions here to use my own SSL certificates for HTTPS to my router. As mentioned in the last line: Remember, that if you ever save the settings on the Admin Access page with the...
View ArticleWifi guest network, Tomato as AP with VLAN
I'm using several wifi routers as AP's (rt-ac68u, r7000, and something else). All running tomato firmware. Upstream of these routers is a hardware firewall appliance (sophos utm). It handles all dhcp,...
View ArticleMemory leak in Shibby build v120 (and maybe v140 also)
When the router doesn't have access to the internet and a custom theme has been configured, the TTB process fails but remains in memory. Because this is retried every now and than, the router locks up...
View ArticleRouters (used as switches/aps) cannot access the internet, while connected...
I have a setup consisting of a main router (connected to the router of the ISP), and connected to it are 3 other routers used as switch/ap. I enabled VLAN's and virtual wireless, primarily to allow a...
View ArticleStuck after initial flash on R7000 coming from DD-WRT Kong to Shibby
I was running DD-WRT Kong on my R7000 but wanted to switch back to Shibby. I flashed with shibby's initial image(http://tomato.groov.pl/download/K26ARM/Netgear R-series initial...
View Article