Quantcast
Channel: Tomato Firmware
Viewing all 5213 articles
Browse latest View live
↧

Tenda AC18 (AC1900) - Tomato firmware support

May 23, 2017, 1:50 pm
$
0
0
The Tenda AC18 (AC18) router released in 2016. It is powered by Broadcom BCM4709C0 @ 1.4 GHz chipset, 256 MB RAM and 128 MB flash. The AC1900 router is compatible with IEEE 802.11a/b/g/n/ac standards, and the maximum speed that you can get with AC18 is 600 + 1300 Mbps.

The Guest network is a useful feature of the AC18 router that creates a separate network for guests. It has 1 x USB 3.0 port(s). You can attach a compatible USB printer to this device. The AC18 has built-in NAS functionality....

Tenda AC18 (AC1900) - Tomato firmware support
↧
Search

OpenVPN client + persist-tun + redirect-gateway = FAIL

May 24, 2017, 3:10 pm
$
0
0
ASUS WL500gP V2 Router
Shibby Tomato Firmware 1.28.0000 MIPSR1-123 K26 USB VPN

I’m wondering whether anyone else is experiencing the following problem, or perhaps you’re having similar problems but don’t realize this could be the cause.

By default, the tomato OpenVPN client specifies the following directives:

Code:
persist-tun
resolv-retry 30
And by default, the tomato OpenVPN server uses the following directive:

Code:
keepalive 15 60
The combination of these settings means...

OpenVPN client + persist-tun + redirect-gateway = FAIL
↧
↧

More than 2 DDNS providers in Tomato

May 25, 2017, 9:47 am
$
0
0
I found a very old similar thread on the subject: https://www.linksysinfo.org/index.php?threads/e2000-tomato-with-3-ddns.69207/
I am not sure if it is still accurate. I want to use more than two DDNS providers. Customs URL's will do. How to accomplish this best?

I see that the DDNS webpage of Tomato simply modifies two NVRAM variables: ddnsx0 and ddnsx1. I guess I could assign values to variables ddnsx2 to ddnsx9 (easy as I just want to use custom URL's) but will it work? Will...

More than 2 DDNS providers in Tomato
↧

(Solved) D-Link DIR-868L A1 Stuck in Recovery Mode

May 25, 2017, 8:03 pm
$
0
0
Hi..

I just received my DIR-868L A1 a few days ago.

After I that I flashed it with Shibby's Build 136
and installed entware and transmission.

It was working fine for a while until I made some
script modification and restarted the router then
it can't bootup anymore.

- Power LED flashing Orange
- can ping 192.168.0.1
- Stuck in Recovery Mode
- Tried to Flash every version of stock firmware, DD-WRT, and Shibby
still stuck in Recovery Mode
↧

Internet Led Always Stays WHite In R7000 Even when there is no internet.

May 26, 2017, 10:49 am
$
0
0
In R7000 The Internet LED the 2nd Led in Router is WHite when there is internet connection But when there is no internet connection its down from back end but connected to router.
it has to be RED color but in tomato firmware it always stays white. even when there is no internet connection. any fix FOR IT?
↧
↧

Wireless Site Survey Weirdness

May 26, 2017, 12:05 pm
$
0
0
I'm in the process of upgrading my router from an RT-N66U to an RT-AC68U (converted from TM-1900AC). Overall everything has gone smoothly from updating the cfe to installing tomato firmware.

My problem is that when I run a Wireless Site Survey the values for "Noise" are "0" or "-2" and "Quality" are all "0". Every other column populates correctly, including the "RSSI" values.

Is this the standard behavior for an RT-AC68U? If not, is there a command I can run in NVRAM to fix/activate this...

Wireless Site Survey Weirdness
↧

D-Link DIR-868L: Another great ARM router supported by Tomato

May 26, 2017, 3:53 pm
$
0
0
View attachment 3284


CPU: BCM4708 (dual-core 800MHz, same as in RT-AC56U/68U)
RAM: 256MB
Flash: NAND 128MB
LAN: 4x Gbit
WAN: 1x Gbit
2,4G: 11n 450Mbps
5G: 11ac 1300Mbps
USB: 1x USB3.0
BTN: 1x WPS, 1x Reset
LEDS: Power and WAN, both bi-color (orange and green)

Tomato by Shibby almost ready ;)

View attachment 3285

More info soon.
↧

RT-AC68U Wireless Survey Weirdness

May 26, 2017, 5:59 pm
$
0
0
I'm in the process of upgrading my router from an RT-N66U to an RT-AC68U (converted from TM-AC1900). Overall everything has gone smoothly from updating the cfe to installing tomato firmware.

My problem is that when I run a Wireless Site Survey the values for "Noise" are "0" or "-2" and "Quality" are all "0". Every other column populates correctly, including the "RSSI" values. (See screen shots below)

Is this the standard behavior for an RT-AC68U? If not, is there a command I can run in...

RT-AC68U Wireless Survey Weirdness
↧
Search

Advice installing script-adblock-not-so-lean

May 27, 2017, 2:21 pm
$
0
0
Hi everyone:

I could use some advice on setting up a more thorough adblocker. Right now, I'm just using a whole bunch of manually inserted domains in Access Restrictions. But I'd like to take it up a notch.

I have an Asus RT-N12 running v1.28.0506 MIPSR2Toastman-RT-N K26 Mini. The SoC is
Broadcom BCM47162 chip rev 0 pkg 2. Is this too old to run adblock-not-so-lean or the original adblock script?

If it could run the script well, how much work is it going to be for me to set this...

Advice installing script-adblock-not-so-lean
↧
↧

Advanced Tomato 3.4-140 VPN Running - status could not be read!

May 28, 2017, 9:24 am
$
0
0
Hi Peeps,

My VPN with work for a few minutes then will get disconnected or will said running -but status could not be read

configuration:
    • Interface type: TUN
    • Protocol: UDP
    • Server address can be obtained
    • Port: 1194
    • Firewall: Automatic
    • Authorization Mode: TLS
    • Check Username/Password Authentication
    • Enter in your TotalVPN username
    • Enter in your TotalVPN password
    • Uncheck the Username Authen....

Advanced Tomato 3.4-140 VPN Running - status could not be read!
↧

cable router + Tomato + vpn client

May 28, 2017, 10:51 pm
$
0
0
Greetings,

I am not so networking advanced. I am connected to the internet through a cable router(tv cable
/ coaxial). Router: Netgear C6250EMR

2 questions please:

1. I would like to set the vpn client directly on the main primary cable router, if this is really not possible the bridge mode would be the last option.

Do you consider it could be possible if I will contact my ISP, they could help me with one of the next 2 options?

a) Modify at least for me(or for all their routers) the...

cable router + Tomato + vpn client
↧

Dual Router R7000 with Apple Airport Extreme

May 28, 2017, 11:33 pm
$
0
0
After I've recently had terrible success setting up my OpenVPN with DD-WRT and IPVanish, I was thinking of giving Tomato a try. I have a few questions:

I want to have a dual router setup, R7000 for VPN and Apple Airport for my main. Will this work properly, I really want to get faster speeds out of my VPN. My normal ISP speeds are around 100mbps. Through IPVanish app on my computer I'm getting around 10mbps. I knew i'd take a speed hit, just didn't think that much.

I'm sure the best...

Dual Router R7000 with Apple Airport Extreme
↧

Reducing NVRAM usage

May 29, 2017, 7:04 pm
$
0
0
So, we all know about the issue of going over 32KB NVRAM usage and the problems it can cause. Or whatever the exact tipping point is, because its not exactly 32KB for me, its a little bit more. If I remember correctly, the highest I could go was about 35KB and not have issues.

I have a Linksys E3200 running AdvancedTomato 3.4-140 and in an effort of freeing up some NVRAM space (documented below) I also found the sshd_dsskey setting. If this setting was left empty (or removed altogether) it...

Reducing NVRAM usage
↧
↧

Restrict access and clarification of UDP multicast traffic

May 30, 2017, 3:52 am
$
0
0
Hi guys,

one question : is there a possibility to restrict access and to do the clarification of UDP multicast traffic ? My ISP modem sends UDP multicast to the router and from there to my own STB (over udpxy).
From 6 am to 4 pm i don't want for my kids to be able to watch Tv on multicast. What about clarification of UDP multicast traffic ? I tried Qos and Access restriction and no combination works.
Using Asus RT-N16 with latest Toastman mod, but thinking to switch on latest 140 Shibby....

Restrict access and clarification of UDP multicast traffic
↧

Working VPN kill switch for selective Routing Policy (v131)

May 30, 2017, 6:43 am
$
0
0
Step-by-step guide on how to implement VPN Kill Switch for selective routing policies​


The new VPN Routing Policy in Tomato by Shibby v131 is amazing! It makes the setting up of very useful advanced routing to be a breeze.

To compliment the new feature, I was looking for an effective selective VPN Kill Switch that will prevent leaks if the VPN looses connection, but will not affect the devices that are not routed through the VPN.

There were...

Working VPN kill switch for selective Routing Policy (v131)
↧
Search

How to remove VyperVPN app

May 31, 2017, 5:16 am
$
0
0
Hi there,

I'm happy user of Tomato USB from Shibby. I have a Netgear WRN3500Lv2.

Yesterday I installed the tomato App for VyperVPN that basically add a Submenu to connect the router to out VPN.

I have some issue with this app, so I decided to reset to default my router including the NVRAM in order to remove completely the app.

After the restart the VyperVPN menu persist.

How can I remove completely the app?

Is there an Hard reset?

Thanks!
↧

Shibby K26RT-N vs K26RT-AC

May 31, 2017, 7:26 am
$
0
0
Getting ready to install Tomato Shibby on my RT-N66U and would like to understand the difference between the K26RT-N firmware vs the K26RT-AC firmware. Not sure which one to install, can anyone tell me the differences and advantages and disadvantages of each. Or point me to a location that will explain those differences.
↧
↧

Likely giving up on TomatoUSB

May 31, 2017, 12:08 pm
$
0
0
Important: none of my below statements should be taken to mean "TomatoUSB sucks!" I do not think that at all. I want to be clear on that point. I just think it's a project that's -- respectfully, please! -- stagnant because we can't improve all the things we need to given lack of manpower and being stuck on binary blobs.

I've purchased a Mikrotik RB2011UiAS-2HnD-IN (will be here in a couple weeks) and plan on playing with it (and...

Likely giving up on TomatoUSB
↧

how to block youtube app meanwhile don't block youtube kids?

May 31, 2017, 5:28 pm
$
0
0
Hi,

I use address=/www.youtube.com/127.0.0.1 into dnsmasq, It looks like youtube with IE is blocked.

but the app of youtube is still working.
How can I block youtube wherever it is, meanwhile I want youtube kids work?
↧

Does Tomato support Wireless Client mode and OpenVPN Client at the same time?

May 31, 2017, 7:24 pm
$
0
0
Is it possible to set up Tomato so that my router is a "Wireless Client" and an "OpenVPN Client" at the same time?

I have set up many that were "Access Points" and "OpenVPN Clients", but never one where I reversed the router into the less common "Wireless Client" mode. Is this possible with Tomato?

My use case is my parents new senior living community. They have wireless, and only wireless, supplied to their apartment. I don't like the idea of them logging into the same WiFi subnet as...

Does Tomato support Wireless Client mode and OpenVPN Client at the same time?
↧
Viewing all 5213 articles
Browse latest View live
Search