Quantcast
Channel: Tomato Firmware
Browsing all 5181 articles
Browse latest View live

FreshTomato - Any Plans to implement Cake QOS?

Hi everyone, Anyone know when Cake is coming to FreshTomato? I temporarily switch from FreshTomato to DD-WRT to see what was in the QOS settings and to my surprise found the CAKE qos. I've been using...

View Article


WiFi disconnections om 2020.3

DIR868L with 2020.3 Wi-Fi disconnection every now and then. Going back to 2020.2 the problems are over.

View Article


Setting up IPv6 for HE Tunnelbroker

This tutorial will show how to setup up routed /64. It should be is possible too setup a /48 too. I went through tunnelbroker.net, so that it what I will be showing. The Firmware You will need to find...

View Article

wl version ambiguity ?

hi all, i am running a r8000 with the FT 2020.2 AIO f/w which is in the ARM7 branch. FT 2020.3 should be having a newer wl, however when i do a wl ver the output is: root@abcdefgh:/tmp/home/root# wl...

View Article

Guide: Flash Linksys EA6300v1, EA6400, EA6500v2, EA6700, EA6900v1.0/1.1 with...

How to flash Linksys EA6300v1, EA6400, EA6500v2, EA6700, EA6900v1.0/1.1 with Tomato. The EA6300v1 uses the same firmware as EA6400 since the routers are exactly the same. WARNING: If anything goes...

View Article


Freshtomato - supported device list

Edit (04/04/20): I'm discontinuing the maintenance of the Wikipedia page as we now have a dedicated page on the freshtomato.org site. https://wiki.freshtomato.org/doku.php?id=hardware_compatibility...

View Article

FreshTomato 2020.3 - WAN DHCP Client Options

All, Can anyone provide guidance on correct format to use when trying to specify additional DHCP client options. In particular I am trying to send Option 61 Client ID for Sky Broadband. Thanks

View Article

refused to do a recursive query

In my logs I am getting May 23 14:35:37 daemon.warn dnsmasq[1339]: nameserver 10.200.0.1 refused to do a recursive query May 23 14:39:44 daemon.warn dnsmasq[1339]: nameserver 1.1.1.1 refused to do a...

View Article


Need help choosing fresh tomato version for a WRT54G V3

So, I am pretty overwhelmed by the choices of firmware and could use some help. My router is a Linksys WRT4G version 3. I want to continue using this router because it will run on a 12V battery (Newer...

View Article


EA6900 AdvancedTomato / FreshTomato 2019.2 daily random reboots

Hi there, I was previously on AdvancedTomato (switched from DD-WRT prior) and had over 32 days of stability which was way longer than I ever had on stock or DD-WRT but after a manually triggered reboot...

View Article

Help with Fresh Tomato firmware on R6300V2

Hey, guys so I just installed Fresh tomato on my R6300v2 yesterday. I have never used Tomato firmware before and I am having some issues with it. So I have the charter version of the router so I did...

View Article

[Fork] FreshTomato-MIPS - development discussion only - for support always...

[FreshTomato-MIPS] Forked off from Tomato-MIPS by Shibby. Project page: https://freshtomato.org Latest version: 2020.3 - 2020-05-09 Source code: https://bitbucket.org/pedro311/freshtomato-mips...

View Article

questions about FT

pedro311 said: [FreshTomato-ARM] Forked off from Tomato-ARM by Shibby. Latest version: 2020.1 - 2020-01-20 Source code: https://bitbucket.org/pedro311/freshtomato-arm Changelog: FreshTomato-ARM...

View Article


support question

Someone please help! I updated my Netgear R6300v2 to 2020.3 and cleared nvram and all went well. When setting up my router again all was fine until I went to enable ‘cut through forwarding’. After that...

View Article

SOLVED: Need help choosing fresh tomato version for a WRT54G V3

So, I am pretty overwhelmed by the choices of firmware and could use some help. My router is a Linksys WRT4G version 3. I want to continue using this router because it will run on a 12V battery (Newer...

View Article


Bricked wnr3500lv2

Got a second wnr3500lv2 but it keeps bricking when installing tomato. what build should I use? Cant get it to work for some reason.

View Article

VLAN GUI - must assing the WAN VID restriction

Say you have a secondary AP and you use the WAN port for LAN connectivity. Currently the VLAN page doesn't allow you to save the config if the WAN is not assigned to a VID. I think this control is...

View Article


Fresh Tomato - many non-critical config changes prompt system reboot

Hi, All, Using Fresh Tomato 2020.3 with some Asus AC3200's, some running OpenVPN as a client, another as the server. All are on the latest K26ARM7 AIO 128K firmware. Having been a fan of Shibby and the...

View Article

FreshTomato (Can't connect to wireless)

So I installed freshtomato-K26_RT-MIPSR1-2020.3-MiniIPv6.zip on a Linksys WRT54G v3 and I tried all day to get the wireless to work playing around with various settings, but no luck. It worked...

View Article

Has my router been hacked?!

Router: Asus RT-AC68U running 2020.2 AIO I noticed that my network printer wouldn't print. I tracked it down to the fact that the computer I was trying to print from was given an ip address in a...

View Article
Browsing all 5181 articles
Browse latest View live