(fresh) Tomato slower than stock firmware
I noticed a general increase in latency multiple times when I played around with tomato firmwares. I now need to use tomato because of the bufferbloat problem...
View ArticleIPoE IPv6 support in FreshTomato 20.3?
Before I upgrade from Advanced Tomato v3.5-140 VPN-64K to Fresh Tomato 20.3, does the latter support IPoE on the WAN settings?
View Articlemix tagged and untagged VLANs on Asus RT-N66U
Hi, OK, I'll try again: I'm trying to set up a seperate guest WiFi on a different VLAN. VLAN1 should be the primary LAN VLAN3 should be the Guest LAN I'm using multiple Access Points, one of them is a...
View ArticleQuestion about using to different internet sources as a combined speed...
Is it possible through some scripting for me to have two routers each set up as a client to a different network, and combine both sources together to get faster internet speeds on the lan? I have a...
View ArticleClik here to view.
Client names in device list
I'm using FreshTomato firmware in both my gateway router and in units configured to be APs. What does it take to get the client names to show up in the AP Device Lists the way they show up in the...
View ArticleFreshtomato 20.3 - access restriction to admin interface not working
As per the subject - I have added the IP address of the only PC I want to be able to access the tomato admin page but it doesnt appear to be working. administration-->admin access-->admin...
View ArticleFreshTomato auto reboot after Cable Modem comes back online?
Hello Everyone. I registered for this site after looking for some sort of forum to speak to other FreshTomato firmware users. I don't know if the is the best (or only) forum available, but it is the...
View ArticleDDNS Custom URL badagent error
Dear all, I am trying to use the custom URL for my domain hosted in Strato. This is the format: https://user:password@dyndns.strato.com/nic/update?hostname=domain After saving I am getting the...
View ArticleAccess Point mode with DHCP client active
Hi, I've been trying to work out a way to get a router running FreshTomato to function as an access point, and still have the DHCP client running. This router would move around between several...
View ArticleClik here to view.
multiwan - interfaces name correction
When enabling MultiWan with say 2x WANs I see the following: Overview: DDNS: MultiWAN Routing: VLAN: @pedro311 for consistency sake it would make sense to align the first WAN interface name.
View ArticleDIR-868L - NVRAM BUG *ROUTER BRICK WARNING*
GhaladReam said: Well, it looks like my DIR-868L is now also bricked. 2020.3 has somehow corrupted the NVRAM on this router. (flashed 2020.3 and selected "erase NVRAM"), now the router is stuck in...
View ArticleR7000 "random" reboots
I just upgraded to the newest FreshTomato [2019.1] When I upgraded, it checked the "clear nvram" box. I've put most of my config back in place, but it did reboot a few times during the configuration....
View ArticleWireless printer glitches with FreshTomato set as "repeater bridge"
Hi, I've got some weird issues with my printer since I'm using FreshTomato instead of DD-WRT on my Asus RT-N12 D1 router which runs as a "repeater bridge". I'm using a Brother wireless printer, which...
View Articlels Tenda V300 / Asus DSL-AC51 supported?
Hi , l have "Tenda V300" and "Asus DSL-AC51" at home. Couldn't find supported tomato for them. With current firmware Asus DSL-AC51 giving me packet loss . Love to get some recommendations.
View ArticleClik here to view.
channel question
Uhm... why does it say Channel 10 in Overview when i clearly select 12 ? (According to my phone's wifi analyzer it is on ch12) I understand why 40mhz is deactivated (as there is 1 other Network on CH6...
View ArticleConfiguring Multiple VLANs between AP and router
Hello, I'm trying to get multiple VLANs set up for the purpose of emulating a remote site. I'm close, but hit a wall yesterday. The config is as such (both devices running current stable FreshTomato):...
View Articlesupport question inside
on another note.... on my R6400 5ghz WiFi was broken too this morning! Flashed the new 2020.3 Yesterday, tested 5ghz WiFi Speed, was around 300mbits so everything seemed fine. Then now this morning...
View Articlewl version ambiguity ?
hi all, i am running a r8000 with the FT 2020.2 AIO f/w which is in the ARM7 branch. FT 2020.3 should be having a newer wl, however when i do a wl ver the output is: root@abcdefgh:/tmp/home/root# wl...
View ArticleClik here to view.
MultiWAN - DDNS - single IP interface limitation
As we all know the DDNS page existed for many years, way before MultiWAN was even discussed... Overall the current DDNS page does the job greately for single WAN, but say you want to be able to reach...
View Article