Quantcast
Channel: Tomato Firmware
Browsing all 5181 articles
Browse latest View live
↧

Tomato using 1.1.1.1 for PPPoE connect-on-demand

While digging through code last night, I came across this in rc/services.c (I was looking at kille72, but it doesn't matter):...

View Article


UPNP Not working

RE; Asus Dark Knight , Running Shibby 1.28 It seems there is an issue with port UPNP forwarding , I have not worked out what is wrong yet . However I googled this issue and one result suggests this is...

View Article


Bandwidth Limiter Not really allocating bandwidth well.

I've use BL successfully to cap specific clients on my 25mbps connection to very specific speeds (sub 5mbps). What I'm finding though, is that BL is not working that great when it comes to managing the...

View Article

DHCP & Wireless Ethernet Bridge

Hi Folks, Recently switched from DDWRT to Adv Tomato on the R7000. I'm trying to setup a wireless bridge from the R7000 to my 4G modem (upstairs). All works good doing the default settings. I can also...

View Article

Connected to PPTP VPN, but Public IP Won't Change

I'm trying to connect one Tomato router to another Tomato router (each one is in a separate location, with different ISP's). The one running the server is configured correctly, as far as I can tell,...

View Article


IPv6 unable to work with Netgear R7000 using Advanced Tomato

Zyxel c2100z modem from Centurylink in bridge mode to Nighthawk R7000 router using Advanced Tomato. I am unable to get my IPv6 to work? Any suggestions? I turned on the IPv6 on the modem, or I think it...

View Article

Add a new kernel module during the compilation

Hello all, After several days of pain to compile my first custom firmware based on Advanced Tomato, I'm trying to fix an issue that require the module NETFILTER_XT_MATCH_CONNTRACK which is currently...

View Article

Asus AC3200 or Netgear R8000?

i've been living with a E3000 for sometime now and I pretty much love it! It currently runs Shibby which is great. Recently, i got upgraded to 1Gb up/down by my ISP. Now, my E3000 is looking pretty...

View Article


[Fork] FreshTomato-MIPS

[FreshTomato-MIPS] Forked off from Tomato-MIPS by Shibby, builds compiled by FreshTomato team FreshTomato team: @kille72 @pedro311 Latest version: 2018.1.066-beta - Coming soon Source code:...

View Article


How to get 2 Subnets on 2 Routers Talking both ways?

Currently trying to setup a dedicated VPN router that sits behind the main Router and get internal devices to communicate with each other when Router 2 WAN is connected to Router 1 LAN ports. My setup...

View Article

Been a long time since i've flashed a router. Help re: AC3200 Asus

I'm struggling to understand why I can't flash my router. I'm reading that ASUS may have disabled some compatibility with older firmware etc. I'm also reading that I should ignore the failure messages...

View Article

OpenVPN Client Settings for AdvancedTomato Shibby

I have setup a Raspberry Pi and installed PiVPN, all well so far. I then installed OpenVPN GUI on my desktop and OpenVPN Connect on my Pixel phone. Using the instructions provided by the PiVPN project...

View Article

Image may be NSFW.
Clik here to view.

PPOE Dual/Russian

Hi , does Tomato support PPOE Dual for the WAN connection ? I currently use DD-WRT and it does support it as a connection type. If not natively supported in the GUI is there another way of being able...

View Article


how to compile libuuid with freshTomato toolchain?

I got the following error while compiling freshTomato 2018.2, so I thought I need to cross compile libuuid first ? ( I have uuid-dev installed in my Ubuntu system) Code: ude/ -DIPTABLES_143 -c -o...

View Article

Please HELP SMB over WAN

Hi all.. I Have Linksys E4200 which Tomato Shibby installed. I attached an USB disk. And activated Samba File Sharing. I want to access this Disk over WAN. I know the security risks about samba sharing...

View Article


Belkin F9K1102: Tomato bring-up

The original first message of this thread, when tomato was not yet ported, can be found at the bottom of this post. Tomato is now operational on the F9K1102 (v1 and v3 only), so I've changed the first...

View Article

[SOLVED] Please HELP SMB over WAN

Hi all.. I Have Linksys E4200 which Tomato Shibby installed. I attached an USB disk. And activated Samba File Sharing. I want to access this Disk over WAN. I know the security risks about samba sharing...

View Article


OpenVPN causing router to crash

had a working openvpn client setup (connecting to a leaf bering router), keys expired so i regenerated and updated the client (advancedTomato). it died, but i knew a new release was out so i upgraded,...

View Article

Install EA6900 with Tomato-USB, confuse with CFE Edit

Had RT-N16 and E4200 installed with Tomato-USB. Just bought a used EA6900, and turns out, it's difficult to install Tomato-USB onto it. There is no clear tutorial over the internet how to flash it....

View Article

Guide: Flash Linksys EA6300v1, EA6400, EA6500v2, EA6700, EA6900v1.0/1.1 with...

How to flash Linksys EA6300v1, EA6400, EA6500v2, EA6700, EA6900v1.0/1.1 with Tomato. The EA6300v1 uses the same firmware as EA6400 since the routers are exactly the same. WARNING: If anything goes...

View Article
Browsing all 5181 articles
Browse latest View live