I've set up a VLAN on Tomato for a bridged Wi-Fi access point, but it can't see my router or the outside world. The DHCP server is enabled (just for the VLAN) but it too is not working, although manual assignment works fine.
I have br1 defined in Basic - Network, with an address 192.168.2.3, DHCP enabled and range 192.168.2.4 - 192.168.2.254. Default Gateway (which is global, not for the bridge specifically) is 192.168.1.1, and that is working for non-VLANs.
Advanced - Virtual Wireless...
VLan DHCP and Access
I have br1 defined in Basic - Network, with an address 192.168.2.3, DHCP enabled and range 192.168.2.4 - 192.168.2.254. Default Gateway (which is global, not for the bridge specifically) is 192.168.1.1, and that is working for non-VLANs.
Advanced - Virtual Wireless...
VLan DHCP and Access