Hi,
My ISP requires VLAN10 tagging on my PPPOE connection. This works on 2019.1 and when I upgrade to 2019.2 either dirty or clearing NVRAM my WAN fails to connect.
Also fails to work on 2019.3 beta versions.
Could be the same as this, although this suggests it does not work on 2019.1 for them:
Instructions from ISP:
FreshTomato 2019.2+ DIR868L WAN VLAN tagging does not appear to work
My ISP requires VLAN10 tagging on my PPPOE connection. This works on 2019.1 and when I upgrade to 2019.2 either dirty or clearing NVRAM my WAN fails to connect.
Also fails to work on 2019.3 beta versions.
Could be the same as this, although this suggests it does not work on 2019.1 for them:
DIR-868L Broken VLAN
I'm using all FreshTomato firmware 2019.1 to 2019.3.118-beta My ISP require me to use 2 VLANs 1. 500 for internet 2. 600 for IPTV at LAN 4 However as soon I applied VLAN settings, the LAN PORT GUI from overview page become incorrect. Physical connection ------ GUI WAN ---------------------->...
www.linksysinfo.org
Instructions from ISP:
- Operating mode: MDI/MDIX
- PPP protocol: PPPoE
- PPP auth...
FreshTomato 2019.2+ DIR868L WAN VLAN tagging does not appear to work