Tomato Firmware 1.28.0000 MIPSR2-140 K26 USB AIO
I have 1 vpn server configured and port input is empty. When I put a number there and click save it looks ok, but after restart empty again.
I checked the generated config file
/etc/openvpn/server1/config.ovpn
Whatever I type into port input I see
proto udp
port 0
dev tun21
Current workaround is to put something like
port 1194
in the custom configuration input.
I have 1 vpn server configured and port input is empty. When I put a number there and click save it looks ok, but after restart empty again.
I checked the generated config file
/etc/openvpn/server1/config.ovpn
Whatever I type into port input I see
proto udp
port 0
dev tun21
Current workaround is to put something like
port 1194
in the custom configuration input.